≡≡
LED

RISTA® – Recessed LED Emergency Exit and Steering Fixture

RISTA® EXIT SIGN Emergency exit and directional fittings are fitted with standard figures and signs, natural disasters such as fire and earthquake. to be used in cases where escape and exit points are marked; suspended ceilings – gypsum ceilings, stone wool ceilings and panel type ceilings. The body structure and sign plate have high heat resistance and resistance to flaming fire conditions. From acrylic material to transparent sign board, various pictograms and signs or colored universal exit sign figures in accordance with standards are produced depending on demand. The symbols can be produced as non-burning Serigraphy Paint or Sticker.The plexi illuminates the symbol of the light source armature guided by the SMD LEDs from the vertical plane to the hub.

With the built-in 1-3 hour option, the battery can be set to operate continuously or intermittently as well as the power.

In other words, the power supply does not require an external unit that is included in the driver-driver housing with all the equipment. Drives complying with supply system standards are used and voltage fluctuations are not affected by fluctuations. When the mains voltage drops below 150AC / V, it switches from the battery to the use mode. It is resistant to voltages and voltages rising or fluctuating to 285AC / V, switches to charging with 185AC / V voltage, automatically cuts off when the charge is fully charged and a warning light it is at a point.

The battery is fully charged for 24 hours in the first installation, NiCD type battery is used to withstand the use during and after the storage battery warranty.

Be sure to specify the figure-symbols depending on the demand in the ordering process eg (E-17).

(Show More..)
  • Product Code :
  • 80-80110
  • Body Colors :
ApplIcatIon Areas

Description

  • Power: 1-2 watts
  • Surface: Double face
  • Protection class: IP40
  • Type of work: Intermittent - Continuous (optional)
  • Charging time: 24 hours (first time installation)
  • Kit: 1-3 hours (optional)

Materials / Coatings

  • Plate: Plexi glass (transparent)
  • Body: Aluminum or ABS actuation
  • Coating: electrostatic powder paint (for Al body)
  • Symbols: Latex Cutting or Serigraphy

Installation Details

  • Mounting type: Under plaster
  • Clips: Stainless steel spring

Electrical Equipment

  • Operating voltage: 150 ~ 285AC / V 50 ~ 60Hz
  • Light Source: SMD LED on AL PCB
  • Battery-battery: NiCD
  • Charging start voltage: 185AC / V
  • Interruption activation voltage: 150AC / V

Product Tags

LIght Curves and GraphIcs RISTA® – Recessed LED Emergency Exit and Steering Fixture

Files

Product CodeBurn ConditionPower (Watts)Burning Time (hr)Weight (Kg)
80-80110from the network1-0,5
80-80110-H1SContinuous210,5
80-80110-H3SContinuous230,5
80-80111from the network2-0,5
80-80111-H1SContinuous210,5
80-80111-H3SContinuous230,5

You may want to review these products;