Türkçe Diline Geç

JERO – Recessed LED Downlight

JERO® Panel type LED Downlight model provides homogeneous light distribution thanks to iced Opal diffuser. It is dustproof with IP44 protection class. The thermally optimized aluminum housing keeps the LED low.
It has a total height of only 95mm to provide mounting in low and restricted ceiling spaces.

The equipment can be applied to surfaces such as suspended ceilings with surfaces up to 30 mm thick with spring-loaded clamps fixed on equipment-free fittings.

The luminaire light source is designed as the backlight for optimum focus, so that the heat generated is absorbed by the integrated cooler in the body.

The diffuser lens, which is positioned so as to be parallel to the front surface mounting floor, has a wide light angle in low-height ceilings. We produce with light color (CCT) 3000 (Warm white), 4000 (Warm white) and 6000 (Cold white) and different body options.

  • Product Code :
  • 15-15600
  • Body Colors :
ApplIcatIon Areas


  • Light Source: Philips SDM LED Module
  • Light emission: 110lm / w
  • Light angle: 140 °
  • CRI: & gt; 80
  • Color Tolerance: MacAdam 3
  • Operating Voltage AC110V / AC220V
  • Power factor (PF): & gt; 0.95

Materials / Coatings

  • Main body: Aluminum plaster
  • Coating: Anodic and electrostatic powder paint
  • Frame colors: Optional RAL colors other than standard colors
  • Diffuser: Opal PPMA Frost

Installation Details

  • Mounting Surface: Under plaster (ceiling should be cut according to suitable measure)
  • Mounting equipment: Internal stainless spring clip

Electrical Equipment

  • Driver: Internal LED Driver

Product Tags

LIght Curves and GraphIcs JERO – Recessed LED Downlight
More InformatIon

Check the details that explain what you can do with this data.


JERO - Recessed LED Downlight - LIGHT CURVE

We provide brightness (IES) curves for each luminaire on our website.
The light curves graphically show how the light is spread to the field.
The light source is located at the center of the system (that is, at the pole of the graph).
When the armature assembly is symmetrical about the vertical axis (circle, square), we only construct a density distribution curve in a vertical plane.
My status is red. If the assembly of the lamp is not symmetrical, we add a blue curve to the graph.
The blue curve shows how the light source shines with 90 degrees of movement against the first position.
When measuring the armature in the welding axis, we measure the C90-C270 plane, while measuring the light axis perpendicularly measure the C0-C180 plane.

JERO – Recessed LED Downlight
  • The given brightness values are measured with a goniophotometer.
  • KARMA laboratory (in comparison with accredited institutions)
  • We measure our armatures by ourselves and record the output of the light.
  • So you can be sure that the armature is illuminated as shown.


JERO – Recessed LED Downlight
JERO – Recessed LED Downlight



You may want to review these products;