FLAT® Family of products 1x T5 LED Tube product line; decorative and architectural lighting solution.
With various options and accessories, it can be added linearly to the tip, it can be used as stalactite lighting with hanging apparatuses at various ceiling heights.
The Opal or transparent diffuser option provides a linear image, which adds to the modern ambiance of the applied space. Aluminum extruded body can be produced in one piece up to 3mt.
There is a variety of body colors available for the decoration to suit the space being used. KIT options that are compatible with a wide range of sensor types and provide 1-3 hours of illumination for emergency lighting in the event of a power failure can also optionally be produced internally in the housing.
Check the details that explain what you can do with this data.DETAILS
We provide brightness (IES) curves for each luminaire on our website.
The light curves graphically show how the light is spread to the field.
The light source is located at the center of the system (that is, at the pole of the graph).
When the armature assembly is symmetrical about the vertical axis (circle, square), we only construct a density distribution curve in a vertical plane.
My status is red. If the assembly of the lamp is not symmetrical, we add a blue curve to the graph.
The blue curve shows how the light source shines with 90 degrees of movement against the first position.
When measuring the armature in the welding axis, we measure the C90-C270 plane, while measuring the light axis perpendicularly measure the C0-C180 plane.
The T5 Retrofit® LED Tube is a conversion product compatible with electronic ballast. With 14-35watt 21-49watt ballast types and quite a few brands and models.
Designed as high ceiling lighting with increased light power, the product is 10mt with 2x T5 LED Tube. and for the ceilings above it.
Models of the series at 30x60cm and 30x120cm are suitable for suspended ceiling panes with a matching slim bezel for all surfaces, with suitable dimensions.
For the purpose of emergency lighting, which is one of the occupational safety and health requirements: